VKCC-5075 | Island Exhibit

1. Specifically, what is an Island Exhibit?

   Island exhibits are displays bordering 3-4 aisles, with the smallest starting at 20’ x 20’. Inline exhibits, by contrast, typically border 1 or 2 aisles and are usually 10’ x 10’ or 10’ x 20’.

   A major benefit of island exhibits is that they do not have the same height and perimeter limitations as inline displays.

   Note: Hanging signs are permitted above island booths.

2. Can an island exhibit be reconfigured into other configurations such as an inline or another island?

   Yes and no. It depends on your island and inline design requirements. Most of the time those are close enough for a seamless reconfiguration. 

   Give us a call or send us an email and we’ll show you design examples. Or, we’ll be happy to work on a “ground up” design specific to your marketing goals.

   Examples:

   VK-5116 | VK-5111 | VK-5008 | VK-5105 | VK-5102

3. I reserved a 20' x 30' space for our industry show. I need an island, but I don't have the budget to purchase one this year. What are my options?

   Renting an island exhibit is the ideal choice in this situation. Renting is affordable, typically 30-40% of a purchase, and we have an extensive gallery of island and inline rental designs.
      
   If you don’t see something you like, no problem. About 50 percent of our rentals are new designs or modifications of existing designs. If it makes sense for you, and it makes sense for us, then we’re happy to create a unique configuration that meets all your trade show marketing requirements. See all your options in the Rental Gallery.

   Examples:

   RE-9002 | RE-9017 | RE-9013 | RE-9068 | RE-9029 | RE-9030

4. I don't see an island that appeals to me or matches my exhibit marketing goals. Can you design one just for me?

   Absolutely! When it comes to islands, it's rare that someone purchases a kit "as is." Nearly every island gets tweaked, or we start from scratch based on your requirements.

   That's the fun part of this process: designing a display that makes your trade show program successful. 

   Give us a call or send us an email. We'll meet with you to review your trade show marketing requirements, including your budget. Then we'll work together to create an exhibit that maximizes your message and sales potential at your show.

5. What are the typical show regulations regarding island (and peninsula) exhibits in the United States?

   Typical Island Show Regulations

   Regulations vary by exhibit hall but the following are typical:  Maximum height of 30' in all areas of your booth allowed in North Hall and Central Halls 3-5. Maximum height of 20' in all areas of your booth is allowed in Central Halls 1-2. Maximum height of 22' in all areas of your booth allowed in South Halls. No limitations on the number of solid walls for your Island booth.

   Note:  Hanging signs are permitted above island booths.

   OTHER CONSIDERATIONS
   
   Canopies and Ceilings
   Canopies, including ceilings, umbrellas and canopy frames, can be either decorative or functional (such as to shade computer monitors from ambient light or for hanging products). Canopies for Linear or Perimeter Booths should comply with line-of-sight requirements.
   
   The bottom of the canopy should not be lower than 7 ft. (2.13m) from the floor within 5 ft. (l.52m) of any aisle. Canopy supports should be no wider than three inches 3 in.(08m). This applies to any booth configuration that has a sight line restriction, such as a Linear Booth. Fire and safety regulations in many facilities strictly govern the use of canopies, ceilings, and other similar coverings. Check with the appropriate local agencies prior to determining specific exhibition rules.
   
   Covered ceiling structures or enclosed rooms, including tents or canopies, shall have one smoke detector placed on the ceiling for every 900 square feet.
   
   

   Hanging Signs and Graphics
   Hanging signs and graphics are permitted upon approval in all standard Peninsula, Island and Split Island Booths, with a maximum height of sixteen feet (16 ft.)(4.87m) to the top of the sign as measured from the floor
   
   Whether suspended from above or supported from below, they should comply with all ordinary use-of-space requirements (for example, the highest point of any sign may not exceed the maximum allowable height for the booth type). Double-sided hanging signs and graphics shall be set back ten feet (10 ft.)(3.05m) from adjacent booths and be directly over contracted space only.
   
   

   Theatrical Truss and Lighting
   Ceiling-supported theatrical truss and lighting are permitted in all standard Peninsula, Island and Spilt Island Booths to a maximum height of twenty feet (20 ft.)(6.1m) where ceiling permits. Ground-supported truss may not exceed the maximum allowable height for the booth type. Logos or graphics are not permitted over the sixteen-foot (l6fl)(4.87m) height restriction and must have four feet (4 ft.)(1.22m) of separation from the top of the sign to the top of the truss.
   
   Exhibitors should adhere to the following suggested minimum guidelines when determining booth lighting:
   
   

   • No lighting, fixtures, lighting trusses or overhead lighting is allowed outside the boundaries of the exhibit space.
   • Exhibitors intending to use hanging light systems must submit drawings to NAMM for approval by the published deadline date.
     
   • Lighting must be directed to the inner confines of the booth space. Lighting must comply with facility rules.
     
   • Lighting which Is potentially harmful, such as lasers or ultraviolet lighting, should comply with facility rules and be approved in writing by exhibition management.
     
   • Lighting that spins, rotates, pulsates, and other specialized lighting effects should be in good taste and not interfere with neighboring Exhibitors or otherwise detract from the general atmosphere of the event.
     
   • Reduced lighting for theater areas should be approved by the exhibition organizer, the utility provider, and the exhibit facility.

Classic Exhibits Inc. warranties the performance of its portable, modular, and custom hybrid systems during normal use, excluding excessive wear and tear, as per the instructions. This covers the workmanship and locking systems as long as the exhibit has a useful life. All remaining parts are covered against defective materials or workmanship as long as the exhibit is in service. The warranty is transferable should the product be sold or assigned to another party.

The manufacturer cannot be held responsible for damages due to abuse, misuse, or shipping damages. This warranty does not cover laminate cracks and chips, wood crate and roto-molded case damage (excluding workmanship), aluminum extrusion scuffs, mars, and scratches from normal use, and graphics wear and tear or misuse. The manufacturer is not responsible for lost or missing parts once the owner has assembled, accepted, and used the product.

Should there be any questions regarding the warranty, please contact your local Classic Exhibits Distributor.

The lead time for the VKCC-5075 | Island Exhibit is 20 - 30+ Business Days - Click for Details.

• Suggested lead times may vary depending on current orders. Please check with Customer Service.
• Production lead times are based on business days and DO NOT include any shipping days.
• Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
• No order will be released to Production without a signed order confirmation.
• Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
• Standard lead times do not apply to orders of multiple quantities.

Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:

• Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
• Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
• Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
• Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.

For more information about exhibit weights and freight options, please contact your local exhibit representative.

Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:

• Inline vs. Island Displays
• Lead Retrieval Devices
• Computer and Monitor Cables
• Demo Equipment
• Overhead Lighting
• Grommets and Grommet Placement in Counters
• Overhead vs. Floor Power Supply
• Flooring and Electrical Wiring
• Options for Hiding Cords and Cables
• Flat vs. Round Electrical Cords
• Multi-Plug Outlets and Extension Cords

By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.